Home / Industries

Auto Part Mold Manufacturer

  • Taillamp 2K Mold

    Taillamp 2K Mold

    2K taillamp bezel mold, part material PC black + PC milk white, hot runner point gate, 2LH+2RH, mold steel 1.2343ESR/ 718H, mold dimension 1,750*1,050*1,147mm.

  • Bi-color Bezel Mold For Tail Lamp

    Bi-color Bezel Mold For Tail Lamp

    Double-color rear lamp bezel mold, part material PC black + PC white, HRS hot runner side gate, 2LH+2RH, mold steel 1.2343ESR (48-52HRC), mold dimension 1,090*1,420*1,130mm.

  • Taillamp Housing Mold

    Taillamp Housing Mold

    Injection mold for taillamp housing, part material PC+ABS black, Synventive hot runner open gate 2 drops, LH+RH, mold steel 1.2344ESR/ 2738HH, mold life 500,000 shots.

  • PC Reflector Mold

    PC Reflector Mold

    PC black reflector mold with hot runner system direct gate, high glossy without base coating. Mold steel 1.2343ESR/718H, fully automatic demould.

  • Twin Shot Headlight Lens Mold

    Twin Shot Headlight Lens Mold

    The twin shot lens mold is different from the mono lens. Twin shot mold has independent injection system, special rotating mechanism and cooling system. In addition, the core side and cavity side are inverted to ensure the 1st molded parts are on the core side.

  • Bi-color Lens Mold

    Bi-color Lens Mold

    Bi-color lens mold for auto front lighting is equipped with HRS hot runner, 2L+2R, and total weight is 16.2T. Germany steel 1.2343ESR is used for fixed side and movable side. Mold can produce 500,000 shots with the robot.